Product Description

Pure Acrylic binder based, nacre additives, pearl-appearence, water-based, first-class, decorative, final coat interior coating.

Properties

Silkcoat Pearl, with a pearl texture, lined or curvy interior coating, has a high covering ability. In addition to being cleanable, it is water based and does not harm human health and environment.

Application Surfaces

Can be applied to all pre-painted interior surfaces such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.

Application

The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty. Silkcoat Universal Primer should be used on new painted and absorbent surfaces, Silkcoat Paste Primer should be used on surfaces that are old painted, dirty or synthetic painted surfaces and putty applied surfaces. Silkcoat Pearl is applied on a single layer with glass trowel without being thinned. With the help of the glass trowel, the line or fold pattern is obtained. Application tools should be cleaned with water after application. For new coated surfaces, at least 28 days must be waited for the application of paint to the surface. The paint should be mixed until it is completely homogenous before use. The Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.