Product Description

Pure Acrylic Emulsion Based, nacre additives, decorative interior wall paint grained structure with pearl effect.

Properties

Thanks to its nacre structure, bright as pearl and matt, Palace offers a special image of texture, allowing for different pattern applications. Due to it being water-based sandy and having a metallic appearance, it gives the possibility to reflect your wall with coolness and splendor.

Application Surfaces

All pre-painted surfaces can be applied to interior surfaces such as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.

Application

The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. If necessary, defects and cracks on the surface should be repaired with Silkcoat Internal Acrylic Putty. If the surface to be applied is flattened with gypsum plaster, Silkcoat Izolac should be used on the surface before Silkomatt application, Silkcoat Universal Primer on old painted, dirty or synthetic painted surfaces; Silkcoat Putty Primer should be used on surfaces with putty application. Silkomatt is applied as a single layer in the final coat as the same color with Palace. Silkcoat Palace is applied, according to the desired pattern, with the help of a brush by taking a little amount of product with the brush’s edge. When the product is about to dry, the liquid on the sand is removed with a clean, thick brush by slightly pressure. Thus, while the sand is taking its matte appearence, the subfloor will be gaining a glossy image. Tools should be cleaned immediately after application. The paint should be mixed until it is completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.