Acrylic copolymer emulsion binder based, ready for application, grained exterior coating.
-Long-lasting, environmental friendly. -Several decorative patterns can be obtained . -High covering ability, also closes plaster faults on the surface. -Easily applicable, water-based structure. -Minimum consumption. -Flexible, fiber additives, matt outward looking.
Can be applied on concrete , concrete plate , cement-based , convantional plaster and similar surfaces.
Can be applied with roller or spray. While the material is wet, the pattern is given by posteri, coral, sponge, roller according to the desired texture.
The application surface should be free from all kinds of dust, rust, dirt, oil and old paint residues. A clean, dry and solid surface should be obtained by scraping the swollen, loosened and poured painted surfaces and applying Silkcoat Acrylic Primer after the surface cracks have been leveled with Silkcoat External Putty and smoothed. The paint should be mixed until it is completely homogenous before use. Before being thinned, it is spread with equal thickness to the surface with the roller. Then, according to the texture desired to be obtained when the material is wet (pestle, coral, sponge), the pattern is given by roll. For spray application, dilute with 8% water. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. Care should be taken to use the same production code and dated materials in order to avoid toner discrepancies.