+255658399292         info@silkcoat.co.tz

Natural Soft

Product Description

Acrylic emulsion adhesive-based, silk-matt outward looks, water based, first class, satin interior finish wall paint.

Properties
  • Healthy and environmental friendly.
  • High covering ability.
  • Breatheable.
  • Cleanable.
  • Satin and silk-matt outward looking, colourfast for years.
Application Surfaces

Can be applied on a wide range of interior old painted surface such as concrete, plaster, wall paints, glass textile etc..

Surface Preparation

The surface must be cleared of any oil, dirt or dust. Swollen and old paintings must be scraped off. The surface must be clean, dry and solid. -Hollows and cracks should be filled with Silkcoat Dâhili Akrilik Macun in case of necessity. -On the surfaces which are absorbent or were not painted before should be obtained by applying Silkcoat Izolac. Old and synthetic painted or dirty surfaces should be obtained by applying Silkcoat Universal Astar, On the surfaces which has been puttied should be obtained by applying Silkcoat Macun Astarı(Putty Primer).

Application

The paint should be thinned 10-15% with clean water and applied with roller, brush or spraying in two coats. -Leave 2 hours between coats depending on weather conditions. -After application tools should be cleaned with water.

Application Details

On new painted surfaces, make Sure that Surface has waited about 28 days before application. -The paint should be completely mixed so that it is homogenous. -Ambient and surface temperature should be between +5 and +35 degrees during the application and product drying season. -Gloss and glasslike Surfaces should be rubbed before application to obtain better adhesive and a healthy Surface.